It is also worth noting that in Windows Server failover clustering comes with every edition, unlike Windows Server R2 and earlier where failover clustering was only included in Enterprise Edition and above.
In production scenarios these network connections should run through entirely different network gear switches, routers, etc to eliminate any single point of failure. This series will be written in a very basic, step-by-step style that walks you through the process in an ordered list with basic instructions and plenty of screen shots to help illustrate the procedure where needed. If by chance this wizard fails, it is most likely related to the permissions on the file share.
You now have a basic 2-node cluster and are ready to move on to the next step of series Clustering Windows Server which is creating your cluster resources. For the Features, from the list of features, select Failover Clustering.
A popup dialog will show that lists the administration tools also being installed. Keep all the selected, choose Add Features and Next. Before creating a cluster, we strongly recommend that you validate your configuration. Validation helps you confirm that the configuration of your servers, network, and storage meets a set of specific requirements for failover clusters.
In the Select Servers or a Cluster window, add in the names of the two machines that will be the nodes of the cluster. You can also choose the Browse button to search Active Directory for the names.
Once both are listed under Selected Servers , choose Next. In the Testing Options window, select Run all tests recommended , and Next.
On the Confirmation page, it will give you the listing of all the tests it will check. Choose Next and the tests will begin. Once completed, the Summary page appears after the tests run. To view Help topics that will help you interpret the results, click More about cluster validation tests.
While still on the Summary page, click View Report and read the test results. Make any necessary changes in the configuration and rerun the tests.
To view Help topics about cluster validation after you close the wizard, in Failover Cluster Management, click Help, click Help Topics, click the Contents tab, expand the contents for the failover cluster Help, and click Validating a Failover Cluster Configuration. For more info, see Validating a Failover Cluster Configuration. In the Select Servers window, add in the names of the two machines that will be the nodes of the cluster. In the Access Point for Administering the Cluster window, input the name of the cluster you will be using.
Please note that this is not the name you will be using to connect to your file shares with. This is for simply administrating the cluster. If you are using static IP Addresses, you will need to select the network to use and input the IP Address it will use for the cluster name. On the Confirmation page, verify what you have configured and select Next to create the Cluster. On the Summary page, it will give you the configuration it has created. You can select View Report to see the report of the creation.
Run the following command to create the cluster if you are using static IP Addresses. When Failover Cluster Manager opens, it should automatically bring in the name of the cluster you created. If it does not, go to the middle column under Management and choose Connect to Cluster. Input the name of the cluster you created and OK. In the Client Access Point window, input the name of the file server you will be using.
Please note that this is not the name of the cluster. This is for the file share connectivity. In the Select Storage window, select the additional drive not the witness that will hold your shares, and click Next. On the Confirmation page, verify your configuration and select Next. You can select View Report to see the report of the file server role creation. Under Roles in the console tree, you will see the new role you created listed as the name you created.
With it highlighted, under the Actions pane on the right, choose Add a share. On the Confirmation page, verify what you have configured, and select Create to create the file server share. On the Results page, select Close if it created the share. If it could not create the share, it will give you the errors incurred. Skip to main content. This browser is no longer supported.
Download Microsoft Edge More info. Contents Exit focus mode. Is this page helpful? Please rate your experience Yes No. Any additional feedback? Note If the cluster nodes are connected with a single network, the network will pass the redundancy requirement in the Validate a Configuration wizard. Node majority with witness disk or file share "Nodes have votes.
In addition, a quorum witness has a vote. The cluster quorum is the majority of voting nodes in the active cluster membership plus a witness vote. A quorum witness can be a designated disk witness or a designated file share witness. The following procedure describes how you can configure quorum configuration in a failover cluster by using the failover cluster snap-in. Hope this helped :. Yes, it is possible to set via the R2 GUI. In the Failover Cluster Manager console, select the cluster you are working with and in the Actions pane on the right-hand side of the console, click on More Actions and select Configure Cluster Quorum Settings from the drop-down menu.
Don't understand why you are not getting any results from the Get-ClusterQuorum cmdlet. It looks like you used the right format for the Set-ClusterQuorum cmdlet, assuming you performed that cmdlet from one of the nodes in the cluster, and you really do have a "Cluster Disk 1". By default, it should have already set it up that way with a two-node cluster. But, you can also check that in the GUI.
In the center pane of the FCM console, there is a summary of the cluster configuration, and one line reads Witness: and shows the type of Witness in use. We have done away with the various "Node and blah" majority concepts in Win R2. We found it caused more confusion than good. The quorum messaging is now simplified as the model has enhanced If you have shared storage, then use a Disk Witness As I noted earlier, the quorum witness setting can be validated in the center pane of the GUI.
What was the exact format of the cmdlet you executed when you say it did not work for you? Was it from a node of the cluster or from a workstation? Re-read Elden's response 'We have done away with the various "Node and blah" majority'. Those no longer exist in ; they did in All you have to do is define a witness.
0コメント